Creality Ender 3 S1 Pro Firmware Download: A Complete Guide
If you are looking for a reliable, versatile, and affordable 3D printer, you might have heard of the Creality Ender 3 S1 Pro. This printer is an upgraded version of the popular Ender 3 S1, with improved features such as a dual Z-axis, a silent mainboard, a touchscreen, and a CV-Laser Module that allows you to switch between FDM and laser printing modes.
creality ender 3 s1 pro firmware download
However, to get the most out of your printer, you need to make sure that it has the latest firmware installed. Firmware is the software that controls the functions and settings of your printer, and updating it can improve its performance, stability, compatibility, and safety.
In this article, we will show you how to download and install the latest firmware for your Creality Ender 3 S1 Pro, as well as how to switch between FDM and laser printing modes. By following this guide, you will be able to enjoy all the benefits of your printer and create amazing projects with ease.
Introduction
What is firmware and why do you need to update it?
Firmware is a type of software that is embedded in a hardware device, such as a 3D printer. It controls how the device operates and communicates with other devices. Firmware is different from regular software because it is not stored on a disk or a memory card, but on a chip inside the device.
Updating your firmware can bring you several advantages, such as:
creality ender 3 s1 pro firmware update guide
how to install creality ender 3 s1 pro firmware
creality ender 3 s1 pro firmware version history
creality ender 3 s1 pro firmware features and benefits
creality ender 3 s1 pro firmware troubleshooting and solutions
creality ender 3 s1 pro firmware compatibility and requirements
creality ender 3 s1 pro firmware latest release and download link
creality ender 3 s1 pro firmware reviews and ratings
creality ender 3 s1 pro firmware comparison and differences
creality ender 3 s1 pro firmware tips and tricks
creality ender 3 s1 pro firmware support and service
creality ender 3 s1 pro firmware alternatives and recommendations
creality ender 3 s1 pro firmware customizations and modifications
creality ender 3 s1 pro firmware enhancements and improvements
creality ender 3 s1 pro firmware bugs and fixes
creality ender 3 s1 pro firmware advantages and disadvantages
creality ender 3 s1 pro firmware tutorials and videos
creality ender 3 s1 pro firmware questions and answers
creality ender 3 s1 pro firmware best practices and settings
creality ender 3 s1 pro firmware changelog and release notes
creality ender 3 s1 pro firmware cv-laser module support
creality ender 3 s1 pro firmware fdm and laser printing switch
creality ender 3 s1 pro firmware slicer software download
creality ender 3 s1 pro firmware user manual download
creality ender 3 s1 pro firmware product specifications and details
creality ender 3 s1 pro firmware warranty and refund policy
creality ender 3 s1 pro firmware online store and price
creality ender 3 s1 pro firmware official website and contact information
creality ender 3 s1 pro firmware forum and community
creality ender 3 s1 pro firmware testimonials and feedbacks
creality ender 3 s1 pro firmware coupons and discounts
creality ender 3 s1 pro firmware accessories and parts
creality ender 3 s1 pro firmware upgrades and replacements
creality ender 3 s1 pro firmware maintenance and cleaning
creality ender 3 s1 pro firmware calibration and leveling
creality ender 3 s1 pro firmware printing quality and speed
creality ender 3 s1 pro firmware safety and precautions
creality ender 3 s1 pro firmware error codes and messages
creality ender 3 s1 pro firmware reset and restore factory settings
creality ender 3 s1 pro firmware backup and restore data
Fixing bugs and errors that might affect your printer's performance or quality.
Adding new features or functions that enhance your printer's capabilities or user experience.
Improving the compatibility of your printer with different materials, accessories, or software.
Increasing the safety and security of your printer by preventing overheating, fire hazards, or unauthorized access.
Therefore, it is recommended that you check for firmware updates regularly and install them as soon as they are available.
What is Creality Ender 3 S1 Pro and what are its features?
Creality Ender 3 S1 Pro is a 3D printer that belongs to the Ender series of Creality. It is an upgraded version of the Ender 3 S1, which is one of the most popular and best-selling 3D printers in the market. The Ender 3 S1 Pro has several improvements over its predecessor, such as:
A dual Z-axis design that ensures more stability and accuracy of the print bed.
A silent mainboard that reduces noise and vibration during printing.
A touchscreen that makes it easier to operate and adjust the settings of the printer.
A CV-Laser Module that allows you to switch between FDM (Fused Deposition Modeling) and laser printing modes.
The Ender 3 S1 Pro has a build volume of 220 x 220 x 250 mm, which is large enough for most of your projects. It supports various materials, such as PLA, ABS, PETG, TPU, wood, and metal. It also has a resume printing function that can recover your prints from power outages or filament runouts.
The Ender 3 S1 Pro is a great choice for beginners and enthusiasts alike, as it offers high quality, versatility, and affordability in one package.
How to check your printer's firmware version and mainboard type?
Before you download and install the latest firmware for your Ender 3 S1 Pro, you need to check two things: your printer's firmware version and mainboard type. This will help you choose the correct firmware package for your printer and avoid any compatibility issues.
To check your printer's firmware version, you can follow these steps:
Turn on your printer and wait for it to initialize.
Tap the "Settings" icon on the touchscreen.
Tap the "About" option on the bottom right corner.
You will see the firmware version displayed on the screen, such as "V1.0.0".
To check your printer's mainboard type, you can follow these steps:
Turn off your printer and unplug the power cord.
Open the bottom cover of the printer by unscrewing the screws.
Locate the mainboard inside the printer. It should have a label with the model number, such as "V4.2.7".
Close the bottom cover and screw it back.
Once you have checked your printer's firmware version and mainboard type, you can proceed to download and install the latest firmware for your Ender 3 S1 Pro.
How to download and install the latest firmware for Creality Ender 3 S1 Pro?
Step 1: Download the firmware package from the official website
The first step is to download the firmware package from the official website of Creality. You can use this link to access the download page:
On the download page, you will see different categories of products, such as "FDM 3D Printer", "Resin 3D Printer", "Laser Engraver", etc. You need to select the category that matches your printer, which is "FDM 3D Printer".
Then, you will see a list of models under that category, such as "Ender-3", "Ender-5", "CR-10", etc. You need to select the model that matches your printer, which is "Ender-3 S1 Pro".
After that, you will see a list of files available for download, such as "Firmware", "User Manual", "Slicer Software", etc. You need to select the file that matches your needs, which is "Firmware".
Finally, you will see a list of firmware packages for different mainboard types, such as "V4.2.2", "V4.2.7", etc. You need to select the package that matches your mainboard type, which you have checked in the previous section.
For example, if your mainboard type is V4.2.7, you need to select the package named "Ender-3 S1 Pro-V4.2.7-Firmware.zip". Then, click on the download icon next to it and save it to your computer.
Step 2: Unzip the firmware package and copy the files to a micro SD card
The next step is to unzip the firmware package and copy the files to a micro SD card. You will need a micro SD card with a capacity of at least 8 GB and a card reader that can connect to your computer.
To unzip the firmware package, you can use any software that can handle zip files, such as WinRAR, 7-Zip, or Windows Explorer. Right-click on the zip file and choose "Extract All" or "Extract Here". You will see a folder with the same name as the zip file.
To copy the files to a micro SD card, you can follow these steps:
Insert the micro SD card into the card reader and connect it to your computer.
Open the folder that contains the extracted files from the firmware package.
Select all the files inside the folder and copy them.
Open the micro SD card drive on your computer and paste the files there. Make sure that the files are in the root directory of the micro SD card, not in any subfolders.
Eject the micro SD card from your computer and remove it from the card reader.
Now you have prepared the micro SD card with the firmware files for your Ender 3 S1 Pro.
Step 3: Insert the micro SD card into the printer and turn it on
The third step is to insert the micro SD card into the printer and turn it on. You will need to make sure that your printer is powered off and unplugged before you do this.
To insert the micro SD card into the printer, you can follow these steps:
Locate the micro SD card slot on the side of the printer. It should be next to the USB port.
Insert the micro SD card into the slot with the metal contacts facing up. Push it gently until it clicks into place.
Plug the power cord into the printer and turn on the power switch.
Once you turn on the printer, it will automatically detect the firmware files on the micro SD card and start updating. You will see a progress bar on the touchscreen indicating the update status.
Step 4: Wait for the firmware update to complete and restart the printer
The final step is to wait for the firmware update to complete and restart the printer. The firmware update process may take a few minutes, depending on the size of the files and the speed of your micro SD card.
Do not turn off or unplug your printer during the firmware update, as this may cause damage or corruption to your printer or firmware. Also, do not remove or insert any other devices or accessories to your printer during the update, such as USB cables, filament, or laser module.
When the firmware update is finished, you will see a message on the touchscreen saying "Update completed". Then, you need to restart your printer by turning off and on the power switch. This will ensure that your printer loads the new firmware correctly.
Congratulations! You have successfully updated your Ender 3 S1 Pro's firmware to the latest version. You can now enjoy all the improvements and features that come with it.
How to switch between FDM and laser printing modes on Creality Ender 3 S1 Pro?
One of the unique features of the Ender 3 S1 Pro is that it can switch between FDM and laser printing modes. This means that you can use your printer not only to create 3D objects with plastic filament, but also to engrave or cut materials with a laser beam.
To switch between FDM and laser printing modes, you need to install a CV-Laser Module on your printer. This is an accessory that you can purchase separately from Creality or other online stores. The CV-Laser Module has a power of 2.5 W and can work with materials such as wood, paper, leather, plastic, etc.
Here are the steps to switch between FDM and laser printing modes on your Ender 3 S1 Pro:
Step 1: Install the CV-Laser Module on the printer
The first step is to install the CV-Laser Module on the printer. You will need to remove the extruder assembly from the printer and replace it with the CV-Laser Module. This will allow you to use the same X-axis and Y-axis movements for both FDM and laser printing.
To install the CV-Laser Module on the printer, you can follow these steps:
Turn off your printer and unplug the power cord.
Remove the filament from the extruder and cut off any excess material.
Unscrew the two screws that hold the extruder assembly to the X-axis carriage.
Disconnect the extruder cable from the mainboard.
Remove the extruder assembly from the printer and set it aside.
Take out the CV-Laser Module from its package and check if it has a fan and a protective cover.
Align the CV-Laser Module with the X-axis carriage and screw it in place with the same screws you removed earlier.
Connect the laser cable to the mainboard. Make sure that you plug it into the correct port, which is labeled "Laser".
Turn on your printer and wait for it to initialize.
Now you have installed the CV-Laser Module on your printer and you are ready to switch between FDM and laser printing modes.
Step 2: Select the laser printing mode on the touchscreen
The second step is to select the laser printing mode on the touchscreen. This will tell your printer that you want to use the laser function instead of the FDM function. You will also be able to adjust some settings for laser printing, such as power, speed, and origin.
To select the laser printing mode on the touchscreen, you can follow these steps:
Tap the "Settings" icon on the touchscreen.
Tap the "Laser" option on the bottom left corner.
You will see a screen with some options for laser printing, such as "Power", "Speed", "Origin", and "Start".
You can use these options to customize your laser printing process according to your needs. Here is what each option does:
"Power": This option allows you to adjust the power of the laser beam, from 0% to 100%. The higher the power, the deeper and darker the engraving or cutting will be. The optimal power level depends on the material and the desired effect. You can experiment with different power levels to find the best one for your project.
"Speed": This option allows you to adjust the speed of the laser movement, from 0 mm/s to 3000 mm/s. The higher the speed, the faster the engraving or cutting will be. However, higher speed may also reduce the quality or accuracy of the result. You can balance the speed and quality according to your needs.
"Origin": This option allows you to set the origin point of the laser, which is the starting point of the engraving or cutting. You can use the arrow buttons to move the laser head to the desired position on the print bed. You can also use the "Home" button to move the laser head to the center of the print bed.
"Start": This option allows you to start the laser printing process. Before you tap this option, make sure that you have prepared your material and placed it on the print bed. Also, make sure that you wear protective glasses and gloves to avoid eye or skin damage from the laser beam.
Once you have selected and adjusted all the options for laser printing, you can tap the "Start" option and watch your printer create amazing engravings or cuts with a laser.
Step 3: Adjust the laser power and speed settings according to your needs
The third step is to adjust the laser power and speed settings according to your needs. You can do this during or after the laser printing process, depending on your preferences. Adjusting these settings can help you achieve better results or correct any errors or defects.
To adjust the laser power and speed settings during the laser printing process, you can follow these steps:
Tap the "Pause" option on the touchscreen to pause the laser printing process.
Tap the "Settings" icon on the touchscreen.
Tap the "Laser" option on the bottom left corner.
You will see a screen with some options for laser printing, such as "Power", "Speed", "Origin", and "Start".
You can use the "+" and "-" buttons to increase or decrease the power or speed of the laser, respectively.
Tap the "Back" option on the top left corner to return to the previous screen.
Tap the "Resume" option on the touchscreen to resume the laser printing process.
To adjust the laser power and speed settings after the laser printing process, you can follow these steps:
Tap the "Stop" option on the touchscreen to stop the laser printing process.
Remove your material from the print bed and check the result.
If you are not satisfied with the result, you can repeat the laser printing process with different power or speed settings.
If you are satisfied with the result, you can turn off your printer and enjoy your project.
By adjusting the laser power and speed settings, you can fine-tune your laser printing process and achieve the best possible results.
Step 4: Start the laser printing process and enjoy your results
The fourth and final step is to start the laser printing process and enjoy your results. You have already selected and adjusted all the options for laser printing, and you have installed and connected the CV-Laser Module to your printer. Now, you are ready to create amazing engravings or cuts with a laser.
To start the laser printing process, you can follow these steps:
Tap the "Start" option on the touchscreen.
Watch your printer move the laser head along the X-axis and Y-axis, following the pattern of your design.
See how the laser beam burns or cuts your material, creating your desired effect.
Wait for the laser printing process to finish. It may take a few minutes or hours, depending on the size and complexity of your design.
When the laser printing process is done, you will see a message on the touchscreen saying "Laser printing completed".
Congratulations! You have successfully switched between FDM and laser printing modes on your Ender 3 S1 Pro and created a stunning project with a laser. You can now remove your material from the print bed and admire your work. You can also share your project with others or use it for your personal or professional purposes.
Conclusion
In this article, we have shown you how to download and install the latest firmware for your Creality Ender 3 S1 Pro, as well as how to switch between FDM and laser printing modes. By following this guide, you will be able to enjoy all the benefits of your printer and create amazing projects with ease.
The Ender 3 S1 Pro is a 3D printer that offers high quality, versatility, and affordability in one package. It has several improved features over its predecessor, such as a dual Z-axis, a silent mainboard, a touchscreen, and a CV-Laser Module that allows you to switch between FDM and laser printing modes.
With the latest firmware installed, you will be able to fix any bugs or errors, add new features or functions, improve the compatibility of your printer with different materials, accessories, or software, and increase the safety and security of your printer.
With the CV-Laser Module installed, you will be able to switch between FDM and laser printing modes with a few simple steps. You will be able to use your printer not only to create 3D objects with plastic filament, but also to engrave or cut materials with a laser beam.
We hope that this article has been helpful and informative for you. If you have any questions or feedback, please feel free to leave a comment below. Thank you for reading and happy printing!
FAQs
Q: Where can I find more information about the Creality Ender 3 S1 Pro?
A: You can find more information about the Creality Ender 3 S1 Pro on the official website of Creality: . You can also check out some reviews and tutorials on YouTube or other online platforms.
Q: How can I create my own designs for laser printing?
A: You can create your own designs for laser printing using any software that can generate images or vector graphics, such as Photoshop, Illustrator, Inkscape, etc. You can also use some online tools or apps that are designed for laser engraving or cutting, such as LaserGRBL, LightBurn, etc.
Q: What are some tips and tricks for laser printing?
A: Here are some tips and tricks for laser printing:
Always wear protective glasses and gloves when using the laser function.
Use a low power and speed setting for testing your design before printing it on your final material.
Use a masking tape or paper to cover your material before printing it to prevent scorching or charring.
Use a fan or an exhaust system to remove the smoke or fumes generated by the laser.
Clean the lens of the CV-Laser Module regularly with a soft cloth or cotton swab.
Q: How can I troubleshoot some common problems with my Ender 3 S1 Pro?
A: Here are some common problems and solutions for your Ender 3 S1 Pro:
If your printer does not turn on or display anything on the touchscreen, check if the power cord is plugged in properly and if the power switch is turned on.
If your printer does not detect the firmware files on the micro SD card, check if the micro SD card is inserted correctly and if the files are in the root directory of the card.
If your printer does not update the firmware successfully or shows an error message on the touchscreen, check if you have downloaded the correct firmware package for your mainboard type and if you have followed the installation steps correctly.
If your printer does not print well or produces poor quality results, check if you have leveled the print bed properly and if you have selected the right settings for your material and mode.
If your printer makes loud noises or vibrations during printing, check if you have tightened all the screws and belts properly and if you have lubricated all the moving parts regularly.
Q: How can I contact Creality for support or feedback?
A: You can contact Creality for support or feedback through their official channels:
Email:
Phone: +86-755-89968500
Website:
Facebook:
Twitter:
YouTube:
Creality is always happy to hear from their customers and provide them with the best service and support possible. 44f88ac181
Comments